Devicename; Dhcp - Ricoh 3406WD Setting Manual

devicename

Use the "devicename" command to display and change the printer name.
View settings
msh> devicename
Printer name configuration
msh> devicename name "string"
• Enter a printer name using up to 31 alphanumeric characters.
• Set single names for each printer.
Printer name initialization
msh> devicename clear name
• Reset the printer name to its default.

dhcp

Use the "dhcp" command to configure DHCP settings.
View settings
The following command displays the current DHCP settings.
msh> dhcp
Configuration
You can configure DHCP.
msh> dhcp "interface_name" {on|off}
• Specify "on" to enable dhcp. Specify "off" to disable DHCP.
• If the DNS server address and domain name are obtained from DHCP, be sure to specify "off".
• wlan can be specified only when the IEEE 802.11 interface is installed.
Interface name
ether
wlan
Current interface priority configuration display
msh> dhcp priority
Interface priority configuration
msh> dhcp priority "interface_name"
Remote Maintenance Using telnet
Interface configured
Ethernet interface
IEEE 802.11 interface
4
137