Ricoh 3406WD Setting Manual page 194

4. Monitoring and Configuring the Machine
Name registration success in Broadcast
name=<NetBIOS name>
Name registration success. WINS server=<WINS
server address> NetBIOS Name=<NetBIOS
name>
nbtd start.
npriter start. (NetWare)
4
no RADIUS/authentication server
no smart card detected on device
no SSID in scan result
no WPA information element in probe response,
rescanning
nwstart start. (NetWare)
Open log file <file name>
permission denied.
192
Message Problem and solutions
Name registration by <NetBIOS Name>
broadcast was successful.
Name registration of <NetBIOS Name> to <WINS
server address> was successful.
The nbtd (NetBIOS over TCP/IP Daemon) has
started.
(In the remote printer mode) The NetWare service
has started.
The supplicant has received a message reporting
that a usable RADIUS server cannot be found.
PEAP/GTC (Generic Token Card) is selected, but
a smart card using GTC authentication cannot be
found.
A network with the SSID you specified was not
found.
The specified SSID might not be available, or the
signal from the access point/multi-channel might
be weak.
There is no WPA information on the response from
the SSID probe of the access point you want to use.
The supplicant is rescanning.
The NetWare protocol stack setup server has
started.
The specified log file was opened when the print
server was online.
When canceling a job, it was determined after
checking the user name and host address that the
user's privileges were insufficient. (Does not apply
to root privileges.)