Registering Names To A Group - Ricoh 3406WD Setting Manual

5. Registering Addresses and Users for Scanner Functions
7. Press [Change] under "Group Name".
8. Enter the group name, and then press [OK].
The Key Display name is set automatically.
9. Press the title key under "Select Title", if necessary.
5
The keys you can select are as follows:
• [Frequent]: Added to the page that is displayed first.
• [AB], [CD], [EF], [GH], [IJK], [LMN], [OPQ], [RST], [UVW], [XYZ], [1] to [10].
Added to the list of items in the selected title.
You can select [Frequent] and one more page for each title.
10. When you want to change the key display, press [Change] under "Key Display".
11. Enter the key display, and then press [OK].
12. Press [OK].
13. Press [Exit].
14. Press the [User Tools/Counter] key.

Registering Names to a Group

This section describes how to register names to a registered group.
You can put names that have been registered in the Address Book into a group.
When registering new names, you can also register groups at the same time.
1. Press the [User Tools/Counter] key.
240