Table of Contents
Advertisement
5. Registering Addresses and Users for Scanner Functions
3.
Press [OK].
If the format of the entered path is not correct, a message appears. Press [Exit], and then enter the
path again.
• Enter the path using this format: "\\ServerName\Share- Name\PathName".
• You can also enter an IPv4 address.
• You can enter a path using up to 128 characters.
Locating the SMB folder using Browse Network
This section describes how to locate the SMB folder using Browse Network.
1.
Press [Browse Network].
5
The client computers sharing the same network as the machine appear.
Network display only lists client computers you are authorized to access.
2.
Select the group that contains the destination computer.
3.
Select the computer name of the destination computer.
Shared folders under it appear.
You can press [Up One Level] to switch between levels.
4.
Select the folder you want to register.
5.
Press [OK].
If a Login Screen Appears
This section describes how to log in to the machine if the login screen appears when you try to access a
folder by browsing the network.
If you have not specified folder authentication, or if an incorrect user name or password has been entered
for folder authentication, the login screen appears.
224
Hide quick links:
Advertisement
Table of Contents
