Configuring The Wins Server - Ricoh 3406WD Setting Manual

7. Appendix

Configuring the WINS Server

This section explains configuring the WINS server.
The printer can be configured to register its NetBIOS name with a WINS server when the power is turned
on. This enables the NetBIOS name of the printer to be specified from SmartDeviceMonitor for Admin even
in a DHCP environment.
• The WINS server is supported with Windows 2000 Servers WINS Manager.
• For details about the WINS server settings, see Windows Help.
• If there is no reply from the WINS server, the NetBIOS name is registered by broadcast.
• The NetBIOS name can be entered using up to 15 alphanumeric characters.
Using Web Image Monitor
1. Start a Web browser.
2. Enter "http://(machine's IP address or host name) /" in the address bar to access the printer
whose settings you want to change.
7
Top Page of Web Image Monitor appears.
3. Click [Login].
The dialog box for entering the user name and password appears.
4. Enter the user name and password, and then click [Login].
Contact your administrator for information about the settings.
Depending on the configuration of your Web browser, the login user name and password might be
saved. If you do not want to save them, configure your Web browser's settings so that this information
is not saved.
5. In the menu area, click [Configuration].
6. Under "Network", click [IPv4].
7. Check that [Active] is selected for [WINS] in the [Ethernet + Wireless LAN] column, and then
enter the WINS server IPv4 address in [Primary WINS Server] and [Secondary WINS
Server].
8. Click [OK].
9. Quit Web Image Monitor.
• p.111 "Using Web Image Monitor"
264