Table of Contents
Advertisement
7. Appendix
• Select [On] or [Off] in "Authenticate Server Certificate".
• Select [On] or [Off] in "Trust Intermediate Certificate Authority".
• Enter the host name of the RADIUS server on "Server ID".
• Select [On] or [Off] in "Permit Sub-domain".
7.
Click [OK].
8.
"Updating..." appears. Wait for about one or two minutes, and then click [OK].
9.
In the menu area, click [Configuration].
10.
Under "Interface", click [Wireless LAN Settings].
11.
Select [Wireless LAN] in "LAN Type".
12.
Select [Infrastructure Mode] in "Communication Mode".
13.
Enter the alphanumeric characters (a-z, A-Z, or 0-9) in [SSID] according to the access point
you want to use.
14.
Select [WPA] in "Security Method".
15.
Select [TKIP] or [CCMP (AES)] in "WPA Encryption Method" according to the access point
you want to use.
16.
Select [WPA] or [WPA2] in "WPA Authentication Method".
17.
Click [OK].
7
18.
"Updating..." appears. Wait for about one or two minutes, and then click [OK].
19.
Click [Logout].
20.
Quit the Web Image Monitor.
• If there is a problem with settings, you might not be able to communicate with the printer. To identify
the problem, print a network summary.
• If you cannot identify the problem, reset the printer interface to normal, and then repeat the procedure
from the beginning.
278
Hide quick links:
Advertisement
Table of Contents
