Ricoh 3406WD Setting Manual page 190

4. Monitoring and Configuring the Machine
cipher suite mismatch
client EAP method rejected
Client password rejected
4
Client TLS certificate rejected
connected DHCP server <DHCP server address>
connected DHCPv6 server <IPv6 address>
connecting
Could not attach to FileServer <error number>
Could not attach to PServer <print server>
connection from <IP address>
Current Interface Speed: xxx Mbps
Current IP address (<current IP address>)
Current IPX address <IPX address>
188
Message Problem and solutions
The uni-cast / multi-cast suite (TKIP/AES/WEP) of
the access point is different from the suite used by
the supplicant.
The authentication mode of the access point is
different with the authentication mode of the
supplicant.
Use the same authentication mode between the
access point and the supplicant.
The client's password was rejected. Check the client
password.
The client's TLS certificate was rejected. Check the
certificate.
The IP address was successfully received from the
DHCP server.
The IP address was successfully received from the
DHCPv6 server.
The supplicant is establishing a Wireless LAN
connection with the access point.
Connection to the file server could not be
established when the remote printer went online.
The file server refused the connection for unknown
reason. Check the file server's configuration.
Connection to the print server has not been
established when the remote printer is turned on.
The print server has refused the connection. Check
the print server configuration.
A user logged in from the host <IP address>.
Speed of the network (10Mbps, 100 Mbps, or
1Gbps).
The IP address <current IP address> was acquired
from the DHCP server.
The current IP address is <IPX address>.