Changing An Smb Folder - Ricoh 3406WD Setting Manual

1. Enter the login user name, and then press [OK].
Enter the login user name specified for folder authentication.
2. Enter the password, and then press [OK].
The path to the selected folder appears.
If a message appears, press [Exit], and then enter the login user name and password again.

Changing an SMB Folder

This section describes how to change settings of the registered SMB folder.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Select the name whose folder you want to change.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, folder name, or e-mail address.
7. Press [Folder].
8. Select the items you want to change.
When specifying a folder, enter the path directly or select it by referencing the network. For more
information, see "Locating the SMB folder manually" and "Locating the SMB folder using Browse
Network".
9. Press [Connection Test] to check the path is set correctly.
10. Press [Exit].
11. Press [OK].
12. Press [Exit].
Registering Folders
5
225