Autonet; Devicename - Ricoh PRO C900S Network Manual

Hide thumbs Also See for PRO C900S:

Table of Contents

• IPv6 mask ranges between 1 - 128 can be selected.

• Up to five access ranges can be specified. The entry is invalid if the target number is omitted.

• You cannot access Web Image Monitor from a restricted IP address.

autonet

Use the "autonet" command to configure AutoNet parameters.

View settings

The following command displays the current AutoNet settings:

msh> autonet

Configuration

You can configure AutoNet settings.

msh> autonet {on|off}

• {on} means "active" and {off} means "inactive".

Current interface priority configuration display

msh> autonet priority

Interface priority configuration

msh> autonet priority "interface_name"

• You can give interface's AutoNet parameter priority.

• Priority settings are available when multiple interfaces are installed.

ether

• If an interface is not selected, the current interface connection settings remain in effect.

• For details about AutoNet, refer to autonet parameters.

Use the "devicename" command to display and change the machine name.

View settings

msh> devicename

Interface

Remote Maintenance by telnet

Interface configured

Ethernet interface

Table of Contents