Wireless Lan - Ricoh 3406WD Setting Manual

Menu
Interface Settings/Network
Interface Settings/Network
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
File Transfer
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and
wireless LAN are connected, the selected interface takes precedence.
• When POP before SMTP is set to [On], also make settings for Reception Protocol and POP3 / IMAP4
Settings.
• When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port.
• p.31 "Interface Settings"
• p.39 "File Transfer"

Wireless LAN

This section lists the settings required for sending e-mail with a Wireless LAN connection.
For details about how to specify the settings, see "Interface Settings" and "File Transfer".
User Tool
Host Name
IEEE 802.1X Authentication for
Ethernet
SMTP Server
SMTP Authentication
POP before SMTP
Reception Protocol
POP3 / IMAP4 Settings
Administrator's E-mail Address
E-mail Communication Port
Program / Change / Delete E-
mail Message
Scanner Resend Interval Time
Number of Scanner Resends
Network Settings Required to Use E-mail Function
Setting Requirements
As required
As required
Necessary
As required
As required
As required
As required
As required
As required
As required
As required
As required
2
77