Ricoh 3406WD Setting Manual page 166

4. Monitoring and Configuring the Machine
channel frequency "channel no."
key "key value" val [1|2|3|4]
4
164
Parameter Value configured
In 802.11 ad hoc mode, you can select a
channel between 1 and 13, or 36, 40, 44, or
48.
Be sure to set the same channel for all ports that
will transmit and receive data.
The default is "11".
The channel in use might differ depending on the
country. For details, see "Wireless LAN".
You can specify the WEP key by entering in
hexadecimal.
With a 64-bit WEP, you can use 10 digit
hexadecimals. With a 128-bit WEP, you can use
26 digit hexadecimals.
Up to four WEP keys can be registered. Specify
the number to be registered with "val".
When a WEP is specified by key, the WEP
specified by key phrase is overwritten.
To use this function, set the same key number and
WEP key for all ports that transmit data to each
other. Put "0x"on the front of WEP key.
You can omit the numbers with "val". The key
number is set to 1 when making these omissions.
The default is blank.