Btconfig; Devicename - Ricoh MP C2800 Operating Instructions Manual

• If you do not specify an interface, the Ethernet interface is selected automatically.
• If many types of interface are installed, configure the interface that communicates with linklocal
address.
• If you do not specify an interface, the Ethernet interface is automatically selected.
• wlan can be specified only when the IEEE 802.11 interface is installed.
ether
wlan
Setting IPP-SSL printing
msh> bonjour ippport {ipp|ssl}
• If IPP-SSL Printing is set to ssl, the IPP port number will appear as 443, and IPP-SSL printing can
be performed with higher security.
• If IPP-SSL Printing is set to ipp, the IPP port number will appear as 631. Port 631 is the port for
normal IPP printing.

btconfig

Use the "btconfig" command to make Bluetooth settings.
View settings
Bluetooth settings are displayed.
msh> btconfig
Mode settings
You can set the Bluetooth operation mode to {private} or {public}.
msh> btconfig {private|public}
• The default is {public}.

devicename

Use the "devicename" command to display and change the printer name.
View settings
msh> devicename
Printer name configuration
msh> devicename name "string"
Interface
Remote Maintenance by telnet
Interface configured
Ethernet interface
IEEE 802.11 interface
4
169