Ricoh 3406WD Setting Manual page 195

Message
Printer <printer name> has no queue
Print queue <print queue name> cannot be serviced
by printer 0, <print server name>
Print server <print server name> has no printer
Print sessions full
pserver start. (NetWare)
Required file server (<file server name>) not found The required file server <file server name> could
restarted.
sap enable. saptype=<SAP type>, sapname=<SAP
name>
server certificate invalid
server identity invalid
server not trusted
session_IPv4 <community name> not defined.
session_IPv6 <community name> not defined.
session_IPX <community name> not defined.
Set context to <NDS context name>
Problem and solutions
The print queue is not assigned to the printer when
the print server was online. Assign the print queue
to the printer using NetWare administrator
account, and then restart the printer.
The print queue cannot be established when the
print server is online. Make sure that the print queue
exists on the specified file server.
The printer was not assigned to the print server
when the print server was online. Use the NetWare
administrator account to assign the printer, and
then restart the printer.
No more print jobs can be accepted. Wait a while
before sending any more print jobs.
NetWare service has started in print server mode
at the print server operation.
not be found.
The LPD has started.
The SAP function was started. The SAP packet is
issued to advertise the service in the SAP table on
the NetWare server.
The server ID is disabled. Check the server
authentication.
The server ID is disabled. Check the server
authentication.
The RADIUS server cannot be trusted.
The requested community name is not defined.
The requested community name is not defined.
The requested community name is not defined.
The NDS context name <NDS context name> has
been set.
Message List
4
193