Making Ties - Extron electronics DTP CrossPoint 4K Series User Manual

Making Ties

The current configuration can be changed using the front panel buttons. Change the current
configuration as follows:
1. Press the
control button indicators that may be lit.
2. Press the
for configuration.
3. Select the desired input and one or more outputs by pressing the input and output
buttons.
• Input buttons and output buttons light or blink:
•
•
•
• To indicate potential ties, output buttons blink the appropriate color when an input
is selected.
• To indicate current ties, output buttons light steadily the appropriate color when an
input is selected.
• To clear unwanted outputs, press and release the associated lit output buttons. To
indicate potential unties, output buttons blink the appropriate color when an output
is deselected but not untied from the input.
4. Press and release the
5.
Repeat steps 1 through 4 to create or clear additional ties until the desired configuration
is complete.
NOTES:
• Only one video input and one audio input can be tied to an output.
• If a tie is made between an input and an output, and the selected output was
previously tied to another input, the older tie is broken in favor of the newer tie.
• If an input with no tie is selected, only the button for the selected input lights.
• When the
tie but no video tie is selected, the button for the input and the button for the output
light the appropriate color (amber, green, or red).
•
As each input and output is selected, the associated output button blinks the
appropriate color to indicate a tentative tie. Buttons for outputs that were already
tied to the input light the appropriate color steadily. Outputs that are already tied
can be left on, along with new blinking selections, or toggled off by pressing the
associated output button.
button to clear any input button indicators, output button indicators, or
Esc
button and
Video Audio
Amber to indicate video and audio ties
Green to indicate video only ties
Red to indicate audio only ties
button to accept the tie or to break an existing tie.
Enter
button and the
Video
DTP CrossPoint 4K Series Matrix Switchers • Operation
button as necessary to select video, audio, or both
button are lit, and if an input with an audio
Audio
35