Extron electronics DTP CrossPoint 4K Series User Manual page 52

Example 7: Unassigning logos
Remove a displayed logo from one or more of scalable outputs as follows:
1. Press the button to clear any input button indications, output button indications, the
Esc
Logo button, or control button indications that may be lit.
2. Select Logo mode: Press and release the Logo
LOGO
SELECT
Press and release.
A lit output button identifies an output that has a logo assigned.
1 2 3 4 5
OUTPUTS
3. Unassign the logo: Press and release one or more output buttons to remove the logo
from those outputs.
Outputs 1through 4 are Push the desired output button.
not selectable.
1 2 3 4 5
OUTPUTS
The button blinks to indicate the selection.
4. Confirm the change: Press and release the
Press the Enter button
to confirm the change.
All input buttons and output buttons
ENTER
return to unlit or background illumination.
The Enter button returns to
unlit or background illumination.
Select
LOGO
SELECT
The button lights.
6 7 8
6 7 8
ENTER
Enter
DTP CrossPoint 4K Series Matrix Switchers • Operation
button.
Enter blinks to indicates the
need to confirm the assignment.
button.
44