Extron electronics DTP CrossPoint 4K Series User Manual page 122

Mic-to-output mixer block (see
Virtual returns-to-output mixer block (
Expansion inputs-to-output mixer block (
These three mixer blocks (see figure 59) are an array of points where mic, virtual bus, and
expansion bus audio can be further mixed into the left and right audio output channels. The
block provides a way to unmute and mute the inputs from the mic/line input, virtual bus,
or expansion bus signal processor chains. The mix-points are muted by default. Unmuting
effectively mixes the inputs into the audio outputs at the level set in the mix controls.
Switcher-to-output Mixer
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
Figure 59. Output Mixer Blocks and Mix-points, DTP CrossPoint 108 4K Shown
DTP CrossPoint 4K Series Matrix Switchers • Matrix Software
figure 53 on page 97,
H
)
I
)
J
Mic-to-output
Mixer
Virtual returns-to-output
Mixer
3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4
2 2 2 2 2 2 2 2 2 2
Expansion inputs-to-output
Mixer
3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4
2 2 2 2 2 2 2 2 2 2
)
3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4
2 2 2 2 2 2 2 2 2 2
5 5 5 5 5 5 5 5 5 5
114