Table of Contents
Advertisement
Switcher Software, cont'd
DSP Configurator-unique navigation
Making ties
Video and audio ties can be made from the keyboard as follows:
1.
2.
N If input number 7 or 8 is selected in step 1, when you perform step 2, the
3.
4.
5.
6.
7.
8.
9.
Highlighting and marking items, cutting or copying, saving a preset
When an item within the program is selected, it is green highlighted. One or more
highlighted items can be cut, copied, pasted, or saved as a preset. The cut, copy,
and paste functions can be performed using the task bar menus (see the Alt
above) or the shortcuts described on the previous page.
N When an item is cut, it is not removed from its original location until it has been
Highlight multiple elements for cut, copy, paste, or a preset as follows:
1.
2.
3.
5-34
MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software
Arrow (
,
,
, and
) and/or Tab (
node ( ) from which you will make the tie. The node is marked by a green
outline ( ).
Press and hold the Shift
Shift
the potential tie (dashed line) to the corresponding output node (input 1 to
output 1, 2 to 2, and so on).
potential tie is to output 6.
Release the Shift
key.
Shift
Press the Enter
key to execute the tie.
Enter
If desired to make additional ties from the same input, press the
up arrow
or down arrow
output to tie to the same input.
If you made additional ties from the same input, press the Enter
execute the tie.
If desired, repeat steps 5 and 6 to tie additional outputs to the same input.
If desired to make ties from a different input, press the left arrow
once, and repeat steps 1 through 7.
Press the Tab
key, Esc
Tab
exit the set ties operation.
pasted in its new location.
Use the arrow (
,
,
, and
highlight.
To highlight sequential blocks:
a.
Press and hold the Shift
key(s) to navigate to and highlight additional elements.
When you reach the last element you want highlighted, release the
Shift
key.
Shift
To highlight non-sequential blocks:
a.
Press and hold the Ctrl
key(s) to navigate to the next desired element
b.
Release the Ctrl
key.
Ctrl
c.
To highlight sequential blocks, press and hold the Shift
then use the arrow (
additional elements.
) to the A/V matrix block (
Tab
key while you press the right arrow
(Shift
is not required) to select another
Shift
key, right arrow
key, or left arrow
Esc
) key(s) to move to the first block to
key, then use the arrow (
Shift
key, then use the arrow (
Ctrl
,
,
, and
) key to navigate to and highlight
) input
b
to drag
key to
Enter
key
key to
key,
Alt
,
,
, and
)
,
,
, and
)
key,
Shift
Advertisement
Table of Contents
