Signal Path Building Blocks - Extron electronics DTP CrossPoint 4K Series User Manual

Signal Path Building Blocks

All of the inputs and outputs that have name blocks (
signal paths:
Visible in figure 75
•
•
•
The input and output processor chains on these paths can be individually loaded with
pre-configured modular templates called building blocks. These modules are designed for
specific microphones, source devices, or speaker destinations, and can streamline the initial
configuration. The modules are configurable and are more versatile than a global template.
The modular building blocks can be loaded to a selected input or output by a clicking on the
signal path label bringing up the building block dialog box.
Different menus or dialogs are available according to the selected signal path.
The building blocks can be renamed and processor blocks further customized according to
the requirements of the system.
* This output 1 amplifier block is not present on non-IPCP models.
Figure 75.
Not visible in figure 75 (visible by scrolling down)
Audio & Video (line) in •
Mic in •
Output
Building Blocks Availability
DTP CrossPoint 4K Series Matrix Switchers • Matrix Software
Virtual returns in
Expansion bus in
in figure 75 ) are discrete
*
136