Extron electronics DTP CrossPoint 4K Series User Manual page 146

Adding a building block
Custom building blocks can be created if necessary, such as when a new mic is connected
to an input. The signal path can be configured for that specific mic and then saved as a new
building block as follows:
1. Modify the processing chain for an input or output. In this example, a custom mic
configuration has been created for mic 2.
2. Open the Building Blocks dialog box: Click the
Building Blocks
Click the number.
1 1 1 1 1 1 1 1 1 1
3. Add a building block: In the dialog box, select the
Click the Add Block icon.
1 1 1 1 1 1 1 1 1 1
4. Name the block: In the
desired, select a folder for the block in the
dialog box opens.
field, enter a name for the new building block (
Name
1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2
DTP CrossPoint 4K Series Matrix Switchers • Matrix Software
number box (
Mic Input 2
A Building Block dialog box opens.
icon ( ) (
Add Block
The Add a Building Block dialog box opens.
: drop-down menu (
Create In
). The
1
).
1
). If
1
).
2
138