Extron electronics DTP CrossPoint 4K Series User Manual page 138

DSP Configurator View menu
Audio & Video I/O — Selects the audio and video I/O page for
the DSP Configurator program (the default view).
Audio I/O — Selects the audio-only I/O page for the DSP
Configurator program.
Video I/O — Selects the video-only I/O page for the DSP
Configurator program.
Meter Bridge — Opens a
monitor the audio levels at each input and output.
NOTES:
• is available in Live mode and connected via the LAN port only.
Meter Bridge
• Figure 72 shows the 10x8 matrix size. Other models have 8 inputs and either 6, 4,
or 2 outputs.
Figure 72. Meter Dialog Box
Re-enable all dialogs — Re-enables all dialog boxes, the pop-up windows that allow
you to make changes to the parameters of a block.
Group Controls — Opens the
group master on page 122).
DSP Configurator Tools menu
Presets — Allows you to mark all items, save a preset, and
clear marked items:
• Mark All Ties — Mark (select) all created ties to save as a
preset.
Mark All Items — Mark (select) all parts of the current
•
configuration, including processors, created ties, and mic
mixes to save as a preset.
• Save Preset — Save the currently marked processors, ties,
and mic mixes as a preset.
Clear Marked Items — Unmark (deselect) all parts of the current configuration
•
(excluding presets), including processors, created ties, and mic mixes.
Connect to Device or Disconnect from Device (depending on Emulate or Live
mode) — Performs the same functions as the
Device Manager — Opens the
between devices that use the DSP Configurator and also add, clone (duplicate), or delete
devices that use the DSP Configurator.
Issue RESET Command — Initializes and clears any or all of the following: ties, mic mixes,
presets, audio configuration, processor blocks, and gain blocks. This reset is identical to the
E }
SIS command (see the
ZXXX
DTP CrossPoint 4K Series Matrix Switchers • Matrix Software
dialog box (see figure 72) with real-time meters that
Meters
dialog box (see
Group Controls
Mode Emulate
dialog box, in which you can switch
Device Manager
System Reset SIS command page 76).
Viewing and using a
and buttons.
Mode Live
130