Extron electronics DTP CrossPoint 4K Series User Manual page 21

These switches tailor the switcher to accept input TP signals as follows:
XTP position — Set this switch to the XTP position if the transmitting device is
•
an Extron XTP CrossPoint matrix switcher. The TP input consists of HDMI with
embedded audio plus RS-232 and IR.
DTP position — Set this switch to the DTP position if the connected device is an
•
Extron DTP transmitter. The TP input consists of HDMI with embedded audio, analog
audio, and RS-232 and IR. The switcher can provide remote power to the transmitter.
TP inputs (see figure 4
C
STP cables between compatible Extron DTP transmitting devices or XTP
matrix switchers and these RJ-45 connectors (see
page 19 to wire the connectors).
The following table identifies the TP inputs by matrix size.
Matrix Inputs
10x8 7 through 10
ATTENTION:
• Do not connect this port to a computer data or telecommunications
network.
•
Ne connectez pas ces port à des données informatiques ou à un
réseau de télécommunications.
HDMI outputs (see figure 4
D
between these ports and HDMI video displays. See
page 19 to use the LockIt HDMI Cable Lacing Bracket to secure the
connector to the transmitter.
The following table identifies the HDMI outputs by matrix size.
Matrix Outputs
10x8 1, 2, 3, 4, 5A, 6A
8x4 1, 2, 3A, 4A
The video and embedded audio signal output on the nA HDMI output is
NOTE:
duplicated on TP output nB (for example, output 5B duplicates output 5A)
Output TP function switches (see
E
The following table identifies the outputs with TP switches by matrix size.
Matrix Outputs
10x8 5B, 6B, 7, 8
8x4 3B, 4B
ATTENTION:
• Position this switch BEFORE connecting the appropriate device to the TP
connector. Failure to comply can damage the endpoint.
• Positionnez le sélecteur AVANT de connecter l'appareil approprié au
connecteur TP. Ne pas respecter cette procédure pourrait endommager le
point de connexion.
and figure 5 on the previous page) — Connect
TP connectors
Matrix Inputs
All others 7 and 8
figure 5) — Connect HDMI cables
and
Matrix Outputs
8x6 1, 2, 3A, 4A
8x2 1A, 2A
figure 4 and figure
Matrix Outputs
8x6 3B, 4B, 5, 6
8x2 1B, 2B
DTP CrossPoint 4K Series Matrix Switchers • Installation
on
HDMI connectors on
.
5)—
XTP
DTP
SIG LINK
IN
HDBT
13