Extron electronics DTP CrossPoint 4K Series User Manual page 95

2. Click the Software or Firmware link as appropriate to the operation you are
performing (see figure
Many popular software packages have direct links on the
TIP:
you can click instead. Figure 42 shows the PCS link.
3. Click Download for the desired software or firmware to download (
Jump to the nearest page of downloads by clicking the desired filtering letter.
TIP:
The dialog box appears (see figure 13).
Log in
1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2
Figure 43. Log in Center Dialog Box
4. Enter the
E-Mail address
(see figure 43, ).
1
TIPS:
• Contact the Extron S3 Sales & Technical Support Hotline to obtain website
credentials.
• Click
Keep me logged in
5. Click to copy the software or firmware to the computer (
Log in
6. If your browser asks you to confirm that you want to continue, click
similar confirmation (see figure 14,
Figure 44. Download Warning and Confirmation
NOTE: Figure 44 may appear different or may not appear at all, depending on your
Web browser choice and its security settings.
7. Click Run to confirm that you want to run the installation (see figure 44,
8. For a firmware download, exit this procedure and return to
in this Matrix Software section on page 93 or
Pages section on page 156.
42, on the previous page).
2
and associated with your Extron website account
Password
to eliminate steps 4 and 5 in future downloads.
).
1
Update the Firmware
DTP CrossPoint 4K Series Matrix Switchers • Matrix Software
page that
Download
).
3
).
2
or make a
Run
1 1 1 1 1 1 1 1 1 1
).
1
Updating the Firmware
in the HTML
87