Captive Screw Signal Insertion; Troubleshooting - Extron electronics DTP CrossPoint 4K Series User Manual

Captive Screw Signal Insertion

Figure 38 is an example of a typical captive screw insertion, in which an Extron IPCP module
provides control of a Blu-Ray player via the matrix switcher. Configure this type of insertion
as follows:
NOTE:
1.
2.
3.
4.

Troubleshooting

If you have problems operating the switcher:
1.
2.
3.
4.
5.
6.
Each captive screw insert is for the associated input or output only and cannot
be tied to any other input or output.
Connect a TP cable from the IPCP module to the RS-232 captive screw port
(input port 8 in this example).
If necessary, enable the port for captive screw (see
Screw Insertion, on page 54).
The RS-232 control signal is inserted directly onto the TP port of the same number and
cannot be tied to any other port.
Connect the TP cable to the endpoint as usual.
Connect a serial cable from the endpoint to the device to be controlled.
1 3A 4A
3B
SIG LINK
XTP
DTP
OUT
HDBT
100-240V ~ -- A MAX
1 2 3 4 5
50-60 Hz
DTP CROSSPOINT 84 4K
Figure 38. Typical Captive Screw Insertion to an Input Endpoint
Ensure that all devices are plugged in and powered on.
Check to see if one or more outputs are muted.
Ensure an active input is selected for output on the switcher.
Ensure that the proper signal format is supplied.
Check the cabling and make corrections as necessary.
Call the Extron S3 Sales and Technical Support Hotline if necessary. See
www.extron.com for the phone number in your region of the world.
Enabling Ethernet and Captive
RS-232
Insertion
RS-232 IR COM 1 COM 1 CO
4B 4 4
Tx Rx G Tx Rx
Tx Rx G
REMOTE RTS CTS
SIG LINK S/PDIF S/PDIF
OVER TP
OUT OUT IR/SERIAL
XTP
RS-232 IR RESET
Tx Rx G
R 1 2
OUT DTP
Tx Rx G Tx Rx
S G S G
HDBT HDBT
RS-232 RS-232 IR
7 8
6
SIG LINK
OVER TP SIG LINK
XTP
XTP
RS-232 IR
DTP DTP
IN Tx Rx G Tx Rx IN IN EXP
RS-232
INPUTS SIG LINK OVER DTP
POWER
AUDIO
12V
RS-232 IR
0.7A MAX
Tx Rx G Tx Rx
DTP OUT
DTP HDMI 4K 230 Tx
RS-232
FULL HIGH DEFINITION 1080P VIDEO OUTPUT
Blu-Ray Player
DTP CrossPoint 4K Series Matrix Switchers • Operation
Network
COM 2 COM 3 DIGITAL I/O
8Ω / 4Ω
LAN 1
1
Tx Rx G Tx Rx G 1 2 3 4 G
L R
RELAYS eBUS
1 2 C 3 4 C +V +S -S G
LAN 2 LAN 3 CLASS 2 WIRING
PWR OUT = 6W
+48V
L R L R L R 3 L R L R
1 1 3
1 3 5 1
MIC/LINE
2
2 4 6 2 4 2 4
L R L R L R L R L R
3
4
TM
BLU-RAY DISC PLAYER
56