Assigning And Unassigning Logos - Extron electronics DTP CrossPoint 4K Series User Manual

Assigning and Unassigning Logos

A logo is a saved bitmapped image that can be superimposed on top of a scalable output
(see the table below for scalable outputs by matrix size).
Matrix
10x8
8x4
NOTES:
• The switcher has memory space for 16 bitmapped logos.
• Logos are created and saved using the Product Configuration Software (see the
PCS Help file).
Example 6: Assigning logos
Set the switcher to display a logo on one or more of the scalable outputs as follows:
1. Press the
Logo button, or control button indications that may be lit.
2. Select Logo mode: Press and release the Logo
LOGO
SELECT
Press and release.
Lit input buttons identify the first 10 saved logo files.
1
1
A lit output button identifies an output that has a logo assigned.
3. Select the logo file: Press and release the input button for the desired logo.
1
The button blinks to indicate the selection.
4. Assign the logo: Press and release one or more output buttons to assign the logo to
those outputs.
Outputs 1through 4 are
not selectable.
1
5. Confirm the change: Press and release the
Press the Enter button
to confirm the change.
ENTER
The Enter button returns to
unlit or background illumination.
Outputs Matrix
5, 6, 7, 8 8x6
3, 4 8x2
button to clear any input button indications, output button indications, the
Esc
LOGO
SELECT
The button lights.
INPUTS
2 3 4 5 6 7
2 3 4 5 6 7
OUTPUTS
Push the button.
INPUTS
2 3 4 5 6 7
Push the desired output buttons.
2 3 4 5 6 7
OUTPUTS
The buttons blink to indicate the selection.
All input buttons and output buttons
return to unlit or background illumination.
DTP CrossPoint 4K Series Matrix Switchers • Operation
Outputs
3, 4, 5, 6
1, 2
button.
Select
8 9 10
8
8 9 10
Enter blinks to indicate the
8
ENTER
need to confirm the assignment.
button.
Enter
43