How To Print The Factory Mode Settings Menus - Citizen CL-E700 series Technical Manual

Chapter 2 Operating Principles
2-3.
Operation Panel

(2) How to print the Factory Mode Settings menus

You can print the current factory mode setting values in the following two ways.
Method 1:
While pressing and holding all keys ([MENU], [PAUSE] ( ), [FEED] (
■
( )), turn on the power.
The current factory mode setting values are printed, and then the printer enters the Factory
mode.
To exit from the Factory mode: Press the [PAUSE] ( ) key.
Method 2
1) Enter the Factory/Service mode by turning on the power while pressing and holding the
[MENU], [FEED] (
(Refer to
2) Press the [MENU] or [FEED] (
3) Press the [STOP] (
4) Press the [MENU] or [FEED] (
5) Press the [STOP] (
6) Press the [MENU] or [FEED] (
7) Press the [STOP] (
The current factory mode setting values are printed.
To exit from menu mode:
Press the [PAUSE] ( ) key several times until the printer exits from the "Test Mode"
main menu.
CL-E700 series
) and [STOP] (
"2-3-3(1) How to enter Factory/Service
■
) key to enter the "Test Mode".
■
) key to enter the "Print Pattern" submenu.
■
) key to print the configuration settings.
■
) keys.
Mode" mentioned earlier.)
) key until "Test Mode" main menu appears.
) key until "Print Pattern" submenu appears.
) key and select "Current Config".
2-56
) and [STOP]