Frame Main", "Sa Main Plate L" And "Plate Peeler - Citizen CL-E700 series Technical Manual

(3) "Frame Main", "SA Main Plate L" and "Plate Peeler"

1. Remove the 2 screws (BH M3.0x4 (NI)) and 1 screw (NO0 TFH M2.6x4 (NI)), and
detach the "Frame Main".
2. Remove the 1 screw (BH M3.0x4 (NI)) and detach the "Plate Peeler" Block from the
"SA Main Frame L".
Tips: The "Plate Peeler" Block can be removed by simply opening the "SA Top Cover"
Block.
3. Peel off the "Label Mark", and remove the "Sponge Peeler Plate" from the "Plate
Peeler".
NO0 TFH M2.6x4 (NI)
BH M3.0x4 (NI)
BH M3.0x4 (NI)
Note on reassembling:
• Stick the "Label Mark" so that its mark is aligned with the
media guide end of the "Cover Head Wire" (a part of the
"Unit Mechanism").
Label Mark
Plate Peeler
Sponge Peeler Plate
3-
49
Chapter 3 Disassembly and Maintenance
3-6. Disassembly, Reassembly and Lubrication
SA Main Frame L
Frame Main
Label Mark
Plate Holder
Paper L
Cover Head Wire
Unit Mechanism
[FRONT]
Align.
CL-E700 series