4,Thermal Print Head Settings
(1) Setting "Head Rank"
① Check the Thermal Print Head resistance value.
② Turn the printer ON.
③ Run OP2-Tools and select the printer to be set.
④ Under the "Option" menu, click on "Setup of HeadRank".
⑤ Enter the Thermal Print Head resistance value, and click on "Setup".
⑥ Click on "Get", and check the "HeadRank" (head resistance value setting).
※When replacing the Main Board, enter the values from the previous board.
(2) Setting "Heat Rank"
① Check the values on the Revision seal on the bottom inside the printer.
② Under the "Option" menu, click on "Setup of HeadRank".
③ Input the "Heat Rank" and click on "Setup".
④ Click on "Get", and check the "HeatRank" (head adjustment value).
※When replacing the Main Board, enter the values from the previous board.
54