(2) Unit Power Supply
1. Remove the 2 screws (BH M3.0x4 (NI)) and detach the "Cover Power PCB".
2. Remove the 4 screws (PH (SW+PW) M3x5) and detach the "Unit Power Supply".
3. Remove the "Sheet Insulation Power PCB" from the "Plate Power PCB".
PH (SW+PW) M3x5
BH M3.0x4 (NI)
Plate Power PCB
(3) Plate Holder Paper L
1. Remove the 3 screws (BH M3.0x4 (NI)) and detach the "Cover Lever".
2. Remove the "SA Damper Shaft" and "Spring Damper" (2 pcs.) from the "Plate Holder
Paper L".
BH M3.0x4 (NI)
BH M3.0x4 (NI)
Cover Lever
Spring Damper
3-
Chapter 3 Disassembly and Maintenance
3-6. Disassembly, Reassembly and Lubrication
Cover Power PCB
Unit Power Supply
Sheet Insulation Power PCB
Spring Damper
SA Damper Shaft
Plate Holder Paper L
29
CL-E700 series