Chapter 3 Disassembly and Maintenance
3-6. Disassembly, Reassembly and Lubrication
• When engaging the "Spring Head Up" (, thin) and "Spring2 Head Up" (, thick), first, hook
them on the upper hooks of the "Unit Head" (), and next on the lower hooks of the "Unit
PF" ()).
At this time, hook the "Spring Head Up" () so that its hook parts direct inward of the
mechanism as shown below. (This can prevent unwanted noise that might occur when the
"Unit Head" () is opened or closed.)
Hook the "Spring2 Head Up" () so that its hook parts direct as shown below.
2
Spring Head Up
Thin
CL-E700 series
Hook parts
Hook parts
3-38
5
Spring2 Head Up
Thick