Chapter 3 Disassembly and Maintenance
3-6. Disassembly, Reassembly and Lubrication
3-6-3. "Unit Ribbon" Covers
1. Remove the 3 screws (BH M3.0x4 (NI)) and detach the "Cover Ribbon Gear" to the right.
2. Remove the 3 screws (BH M3.0x4 (NI)) and detach the "SA2 Ribbon Unit Fan" to the left.
3. Disconnect the connector J604 from the main body.
BH M3.0x4 (NI)
SA2 Ribbon Unit Fan
Cover Ribbon Gear
J604
BH M3.0x4 (NI)
Note on reassembling:
• When mounting the "SA2 Ribbon Unit Fan", pay attention so as not to pinch the cable of
J604.
3-
15
CL-E700 series