Unit Power Supply" And "Paper Holder" Block; Unit Power Supply" Block And "Paper Holder" Block - Citizen CL-E700 series Technical Manual

Chapter 3 Disassembly and Maintenance
3-6. Disassembly, Reassembly and Lubrication

3-6-14. "Unit Power Supply" and "Paper Holder" Block

(1) "Unit Power Supply" Block and "Paper Holder" Block

1. Remove the "Unit Ribbon". Refer to
2. Remove the "Unit Opepane". Refer to
3. Remove the "Case" and "Cover Steel L". Refer to
4. Remove all connectors from the "SA Main PCB". Refer to
Connectors".
5. Remove the "Unit Mechanism". Refer to
6. Remove the 4 screws (BH M3.0x4 (NI)) and detach the "Frame Mechanism".
7. Remove the 2 screws (BH M3.0x4 (NI)) and detach the "Unit Power Supply" Block by
lifting it upwardly after shifting it toward the rear as shown by the arrow.
8. Disconnect the "SA Power Cable" and the AC input connector from the left side and
right side of the "Unit Power Supply" Block, respectively.
9. Remove the 2 screws (BH M3.0x4 (NI)) and detach the "Paper Holder" Block from the
bottom frame.
10. Remove the 2 screws (BH M3.0x4 (NI)) and detach the "Plate Holder Paper R" from the
bottom frame.
Frame Mechanism
SA Power Cable
J13
"Unit Power Supply"
Block
AC Input Connector
CL-E700 series
"3-6-2 Unit Ribbon".
"3-6-10(1) Unit Opepane".
"3-6-11
"3-6-13 Unit Mechanism".
BH M3.0x4 (NI)
BH M3.0x4 (NI)
BH M3.0x4 (NI)
3-28
Case".
"3-6-12(1) "SA Main PCB"
BH M3.0x4 (NI)
"Paper Holder" Block
Plate Holder Paper R
BH M3.0x4 (NI)