Returning The Network Configuration To Factory Default Settings - Citizen CT-D101TR Manual

Introduction

1-4-2. Returning the Network Configuration to Factory Default Settings

1) Press and hold the panel button.
2) When you hear the beep, press and hold the panel button again within 3 seconds.
The following message is printed, and the network settings return to factory default
settings.
]
When the operation is complete, the printer restarts automatically.
When the network setting is set to automatically obtain the IP address from the DHCP
server, the IP address assigned may be different from the previous one.
Network
I/F Board
Information
Information
--!Caution!--
Printer will
automatically restart.
Warning
8