Citizen CLP 1001 User Manual
  1. Manuals
  2. Brands
  3. Citizen Manuals
  4. Printer
  5. CLP 1001
  6. User manual

Citizen CLP 1001 User Manual

Citizen systems user's manual printer clp 1001, clp 2001 clp 6001, clp 6002, clp 6401 clp 7201e, clp 7202e
Hide thumbs Also See for CLP 1001:
Table of Contents

Advertisement

Quick Links

See also: User Manual
E
N
G
L
I
S
H
User's Manual
CLP 1001, 2001
CLP 6001, 6002, 6401
CLP 7201e, 7202e

Advertisement

Table of Contents
loading

Related Manuals for Citizen CLP 1001

Summary of Contents for Citizen CLP 1001

  • Page 1 User’s Manual CLP 1001, 2001 CLP 6001, 6002, 6401 CLP 7201e, 7202e...
  • Page 2 "DESIGNED AND MANUFACTURED TO BE EQUIVALENT TO EUROPEAN STANDARD FOR ITE, EN60950." CE marking shows conformity to the following criteria and provisions: EMC Directive (89/336/EEC)/EN55022 & EN50082-1 Low Voltage Directive (73/23/EEC)/EN60950...
  • Page 3 Instead use a damp cloth for cleaning, when the printer is disconnected from the mains supply. Do not use this product near water or where a chemical reaction can occur such as in a laboratory or where there is a lot of oil, dust, salt or iron particles.
  • Page 4 25. We are not liable for any problems resulting from the use of optional products and consumable supplies other than the designated products contained herein. 26. We are not liable for any damage caused by user's erroneous use of the printer and inadequate environment.

  • Page 5: Table Of Contents

    Table of Contents Chapter 1 – Printer Setup ... 1 Confirmation of Carton Contents ... 1 Part Names and Functions ... 2 Connection to Power ... 5 Connection to a Computer... 5 Chapter 2 – The Control Panel... 6 Control Panel ... 6 Normal Operating Mode ...

  • Page 7: Chapter 1 - Printer Setup

    Do not grip the foam or cardboard packaging that may break, causing the printer to drop. Depending on the version of printer you have, you should check the following items are present with your printer: CLP Model...

  • Page 8: Part Names And Functions

    1.2 Part Names and Functions INSIDE VIEW: CLP 7201e CLP 7202e INSIDE VIEW: CLP 6001 CLP 6002 CLP 6401...
  • Page 9 Control panel: To set the printer configuration settings. Ribbon holder: To attach the source or unused ribbon (not on CLP 1001) Ribbon winder: To wind the ribbon after printing (not on CLP 1001) Roll holder: Holds the roll of media.
  • Page 10 FRONT VIEW n Control panel The printer has two LED indicator lights and an LCD screen that displays printer messages. 1. LEDs : One LED is the power indicator and the other is the error indicator. 2. LCD: Displays the current printer status, configuration settings, or an error message.

  • Page 11: Connection To Power

    Connect to an AC outlet as follows: Check that the power switch on the printer is set to OFF. Connect the connector of the power cord to the power inlet on the printer. Insert the plug of the power cord in the AC outlet.

  • Page 12: Chapter 2 - The Control Panel

    Chapter 2 – The Control Panel 2.1 Control Panel The control panel on the front of the printer consists of three control keys (Pause, Feed and Stop), two LED indicator lights (Power, Error) and a LCD message screen. On the left side of the control panel there are three adjustment controls (paper gap, black line and LCD contrast).
  • Page 13 Saves the selection contents and returns the printer to the normal operating mode. The functions indicated by an ♦ character work on the CLP 1001, 2001, 6001, 6002 and 6401 printers. Those with a ● character work on the CLP 7201e and 7202e...

  • Page 14: Self-Test Mode And Hex Dump

    The mode is selected with the Pause key and the mode item is selected with the Feed key. Changing of the contents is executed as soon as they are displayed on the screen. Pressing the Stop key returns the printer to the normal operating mode.

  • Page 15: Adjusting The Sensors For Different Media

    The voltage setting mode, part of the system setting mode, is used to correctly adjust the see-through or black line sensors for the particular type of media being used in the printer. The ideal voltage is between 3.0v and 3.3v for both the PE (paper end or gap) and BL (black line) modes.

  • Page 16: Chapter 3 - Paper & Ribbon

    Chapter 3 – Paper & Ribbon 3.1 Media Installation CAUTION The printer is designed for easy loading of paper and ribbon. However, here is a detailed guide for first-time users: Push down the open lever ① to release the print head and...

  • Page 17: Ribbon Installation (Clp 2001, 6001, 6002, 6401)

    The open lever hook will lock. Close the cover. Turn on the power to the printer. The LCD screen on the control panel will display "On line." Press the Feed key. The paper will advance to the next label and stop there.

  • Page 18: Ribbon Installation (Clp 7201E, 7202E)

    NOTE: the CLP 7201e and CLP 7202e destination (used) ribbon winds in the opposite direction to the CLP 1001, 2001 and 6000 series. Close the mechanism and press down the green plastic to lock the mechanism, then close the cover.

  • Page 19: Media Thickness Adjustments

    (thickness & width). Incorrect adjustments can cause failure of the print head. The offset adjustment screw allows you to adjust the printer depending on the thickness of media being used. The relationship between the offset adjustment screw and the print head...

  • Page 20: Media Width Adjustments

    3.5 Media Width Adjustments CAUTION Adjustments may be needed if paper with different width is used. Print darkness is affected by the amount of pressure on the print head so it must be adjusted with the head pressure adjustment screw if necessary. The pressure on the right side of the print head, viewed from the front panel, is adjusted by turning the head pressure adjustment screw.

  • Page 21: Ribbon Tension Adjustments (Clp 2001, 6001, 6002, 6401)

    When the ribbon slips or wrinkles during printing, adjust the ribbon tension. The printer has already been factory set with the ribbon width of 114 mm. When using ribbon with a different width, adjust it according to the following procedure: Hold the ribbon roll with one hand so that it does not turn.

  • Page 22: Ribbon Tension Adjustments (Clp 7201E, 7202E)

    3.7 Ribbon Tension Adjustments The CLP 7201e and 7202e feature an automatic ribbon tensioning system to keep even tension during a print run. If you receive a “Ribbon Out” error message during normal operation, you may need to adjust the tensioning system.

  • Page 23: Adjustable Media Sensor

    The adjustable media sensor is standard on the CLP 6001, 6401 and 7201e models. It can be fitted as an option to all other models. If the printer has both a fixed sensor and an adjustable sensor installed, remember to select the “AjSensON” setting in the control panel. See section 2.5 for more details.

  • Page 24: Chapter 4 - Troubleshooting

    Chapter 4 – Troubleshooting 4.1 Error Messages When there is a problem with the printer, a buzzer sounds, and the error lamp on the control panel lights and an error message is displayed on the LCD screen. Some of the most common errors and corrective actions are shown below.

  • Page 25: Print Troubleshooting

    4.2 Print Troubleshooting Switch on the printer whilst holding down the FEED key until “PrntTest” is displayed. A sample output is printed on page 2. Problem Missing lines Print head is damaged. (vertical lines) Dropouts (light Print head is dirty.

  • Page 26: Interface Troubleshooting

    However, for serial interfaces, we recommend the use of Citizen’s standard RS232C serial cable for correct operation of your printer. In case of interface errors, initially you should replace the interface cable with a known good cable before contacting our service personnel.

This manual is also suitable for:

Clp 1001, cpl 2001, clp 6001, cpl 6002, cpl 6401, cpl 7201e, cpl 7202eClp 6002Clp 7202eClp 2001Clp 6001Clp 6401 ... Show all

Table of Contents