Sa Power Sw Cable" And "Frame Bottom - Citizen CL-E700 series Technical Manual

Chapter 3 Disassembly and Maintenance
3-6. Disassembly, Reassembly and Lubrication

3-6-15. "SA Power SW Cable" and "Frame Bottom"

1. Remove the "Unit Ribbon". Refer to
2. Remove the "Unit Opepane". Refer to
3. Remove the "Case" and "Cover Steel L". Refer to
4. Remove all connectors from the "SA Main PCB". Refer to
Connectors".
5. Remove the "Unit Mechanism". Refer to
6. Remove the "Unit Power Supply" Block and "Paper Holder" Block. Refer to
Power Supply" Block and "Paper Holder"
7. Remove the 1 screw (BH M3.0x5K) () and 2 screws (BH M3.0x4 (NI)) (), and detach the
"Cover Steel R" ().
8. Remove the 5 screw (BH M3.0x5K) (), detach the "Cover Steel Rear" (), and peel off the
labels ("Label FCC ICES VCCI-A", Label Caution and Label Rating) from it.
9. Remove the 1 screw (PH (SW+PW) M4x6) () and 2 screws (NO2 FH M3.0x6 (NI)) (), and
detach the "SA Power SW Cable" () and "Cover Plate Inlet". Then, by releasing the hook,
remove the "Ferrite Core" from the "SA Power SW Cable" (). (Refer to the magnified view.)
10. Remove the 2 screw (BH M3.0x4 (NI)) and detach the "Plate Inlet".
11. Remove the 2 screw (PH (SW+PW) M4x6) and detach the "Plate Hinge R".
12. Remove the 2 screw (PH (SW+PW) M4x6) and detach the "Plate Hinge L".
13. Remove the 4 screw (BH M3.0x8) and detach the "Leg" (4 pcs.).
PH (SW+PW) M4x6
Plate Hinge L
Frame Bottom
Leg
BH M3.0x8
CL-E700 series
"3-6-2 Unit
"3-6-10(1) Unit
8 SA Power SW Cable
PH (SW+PW) M4x6
6
Cover Plate Inlet
Plate Inlet
BH M3.0x4
(NI)
PH (SW+PW)
M4x6
2
BH M3.0x4 (NI)
Ribbon".
Opepane".
"3-6-11 Case".
"3-6-12(1) "SA Main PCB"
"3-6-13 Unit Mechanism".
Block".
NO2 FH M3.0x6 (NI)
7
Ferrite Core
Plate Hinge R
3 Cover Steel R
3-30
"3-6-14(1) "Unit
BH M3.0x5K
4
Cover Steel Rear
5
4 BH M3.0x5K
BH M3.0x5K
4
Label FCC
ICES VCCI-A
Label Caution
Label Rating
1 BH M3.0x5K
Ferrite Core