Notes on reassembling:
• Be sure that the projection "A" of the "Leaf Adjust Sensor U" () directs as shown below
and the "Leaf Adjust Sensor U" () is seated inside the lib.
14
Leaf Adjust Sensor U
13
NO.0 TFH (PT4-0.5) M2.0x4
• First, insert the spring "Spring Friction Sen U" () into the boss of the "Holder Sensor U"
(). Next, put the "Plate Friction Sen U" () on the spring and mount it in place.
12
Spring Friction Sen U
11
Plate Friction Sen U
• Run the "FFC TRA Sensor" () as shown below. Pass it through the two slits ("A" and
"B") and the hook part.
Hook
Holder Sensor U
9
9
Holder Sensor U
6
Cap Sensor Cable U
Chapter 3 Disassembly and Maintenance
3-6. Disassembly, Reassembly and Lubrication
To be inside the libs.
A
(Projection)
[Bottom View]
Boss
[Bottom View]
FFC TRA Sensor
10
Slit "A"
Slit "B"
3-
35
[Bottom View]
[Bottom View]
CL-E700 series