Gs C 0 M N (Setting The Numbering Print Mode) - Citizen CT-S2000 Command Reference Manual

GS C 0 m n
[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]
[See Also]
[Sample Program]
[Print Results]
Setting the numbering print mode
<1D>H<43>H<30>H<m><n>
0≤m≤5
0≤n≤2
This command sets the numbering (serial number counter) print mode.
"m" denotes the number of print columns.
m = 0 Prints the columns indicated by numeral. In this case, "n" has no
meaning.
m = 1 to 5 Indicates the maximum number of columns to be printed.
Prints the counter in "m" columns.
"n" specifies a printing position within the printing columns.
n = 0 Prints the data right justified. The blank columns are spaced.
n = 1 Prints the data right justified. The blank columns are filled with "0".
n = 2 Prints the data left justified. The right blank will become invalid.
If either "m" or "n" has a value beyond their ranges, that setting will becomes invalid.
m = 0, n = 0
GS C1, GS C2, GS c, GS C;
LPRINT CHR$(&H1D);"C0";
LPRINT CHR$(0); CHR$(0);
GOUSAB *CNT
LPRINT CHR$(&H1D);"C0";
LPRINT CHR$(1); CHR$(0);
GOUSAB *CNT
LPRINT CHR$(&H1D);"C0";
LPRINT CHR$(3); CHR$(0);
GOUSAB *CNT
LPRINT CHR$(&H1D);"C0";
LPRINT CHR$(3); CHR$(1);
GOUSAB *CNT
LPRINT CHR$(&H1D);"C0";
LPRINT CHR$(3); CHR$(2);
GOUSAB *CNT
END
12345
67890
11 12 13 14 15
0160 170 180 19020
21 22 23 24 25
*CNT
FOR I=1 TO 5
LPRINT CHR$(&H1D);"c";
NEXT I
LPRINT CHR$(&HA);
RETURN
Counts from 1 to 5 at m = 0 and n = 0.
Counts from 6 to 10 at m = 1 and n = 0.
Counts from11 to 15 at m = 3 and n = 0.
Counts from 16 to 20 at m = 3 and n = 1.
Counts from 21 to 25 at m = 3 and n = 2.
- 103 -