Hex Dump Mode - Citizen CL-E700 series Technical Manual

(2) Hex dump mode

You can print the data in the receive buffer in hexadecimal form.
For label:
1. While pressing and holding the [STOP] (
2. Wait until the LED (green) lights on and the LCD indicates "Hex Dump Mode Label
Media", then release the [STOP] (
* If the [STOP] (
Dump Mode Cont. Media". In this case, repeat from Step 1.
The printer enters hex dump mode and, when print data is sent to the printer, hex dump
printing starts.
To exit from hex dump mode: Turn off the power.
For continuous media:
1. While pressing and holding the [STOP] (
2. Wait until the LED (green) lights on and the LCD changes from "Hex Dump Mode Label
Media" to "Hex Dump Mode Cont. Media", then release the [STOP] (
The printer enters hex dump mode and, when print data is sent to the printer, hex dump
printing starts.
To exit from hex dump mode: Turn off the power.
DUMP LIST
02 40 30 31 30 30 0D 02 60 30 30 32 30 0D 02 4C .M0100..c0020..L
44 31 31 0D 31 30 30 30 30 30 30 30 30 30 31 30
30 30 31 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 0010123456789:;<
■
) key.
■
) key is kept pressed, the display of the LCD changes to the next "Hex
[Dump list example]
■
) key, turn on the power.
■
) key, turn on the power.
D11.100000000010
2-51
Chapter 2 Operating Principles
2-3.
Operation Panel
■
) key.
CL-E700 series