Citizen CL-E700 series Technical Manual page 160

Chapter 4 Troubleshooting
4-2. Troubleshooting
Symptoms
Ribbon slants.
Ribbon slacks on the
take-up side.
"Error Ribbon Run" is
displayed on the
LCD.
CL-E700 series
Checks
1. Is the ribbon correctly inserted into the
ribbon holders?
2. Is the ribbon path correct?
3. Is the ribbon slant elimination
adjustment made?
1. Is the "SA Ribbon Tension Shaft F" to
give an adequate tension to the take-up
side ribbon correctly installed?
(Push it by hand and check if it moves
smoothly.)
2. Are the sensor projections incorporated
in the "SA Ribbon Tension Shaft F" free
from contacting with the
photointerrupters of the "SA Ribbon
Sensor"?
(Push the "SA Ribbon Tension Shaft F"
by hand and check if it moves smoothly.
For its operation, refer to "2-1-4. Ribbon
Feed Mechanism".)
1. Insert the ribbon correctly.
2. Re-install the ribbon correctly.
3. Adjust it according to
Ribbon Slant Elimination
Adjustment".
1. Install the "SA Ribbon Tension
Shaft F" correctly.
2. Replace the "SA Ribbon Tension
Shaft F" or the "SA Ribbon
Sensor".
4-10
Remedies
"3-7-2