debug platform dot1x
debug platform dot1x
Use the debug platform dot1x privileged EXEC command to enable debugging of 802.1x events. Use
the no form of this command to disable debugging.
Syntax Description
initialization
interface-configuration
rpc
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)FX
Usage Guidelines
The undebug platform dot1x command is the same as the no debug platform dot1x command.
Related Commands
Command
show debugging
Catalyst 2960 Switch Command Reference
B-26
debug platform dot1x {initialization | interface-configuration | rpc}
no debug platform dot1x {initialization | interface-configuration | rpc}
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Display 802.1x initialization sequence debug messages.
Display 802.1x interface configuration-related debug messages.
Display 802.1x remote procedure call (RPC) request debug messages.
Appendix B
Catalyst 2960 Switch Debug Commands
78-16882-01