Showing Current Alarms - Symmetricom TimeProvider 5000 User Manual

Chapter 4 Provisioning
Provisioning Alarms
To display the configuration for all alarm types, enter the following:
1. Type
show alarm-config

Showing Current Alarms

The Show Alarm command displays all current alarms.
Example
To display a list of all current alarms enter the following:
1. Type
show alarm
Displaying Alarm and Unit Status
The Show Status command displays the system status information as follows:
Assigned System Name

Uptime for the IMC card and IOC card

System date and time

Number of standing system alarms

Active IOC card

Standby IOC card

Currently selected reference mode

Reference Input

Clock status of active IOC card

PTP Service Mode (GrandMaster or Probe)

Expansion shelf connections

Note: Probe mode is only available with the TP5000 platform as part
of the TimeAnalyzer 7x00.
Example
348 TimeProvider 5000 User's Guide
and press Enter.
and press Enter.
098-00028-000 Revision F – May, 2012