Compatibility Matrix - Symmetricom TimeProvider 5000 User Manual

See Table 6-6

Compatibility Matrix

Table 6-6 below describes the minimum firmware revision required for TP 5000
hardware. The IMC, IOC and expansion shelves should all contain the same
firmware revision (see
Table 6-6. Compatibility Matrix - TP5000 Hardware and Firmware
Description
IMC Module
IMC Module - NTP
I/O Module
IOC Module, Quartz
IOC Module, Rubidium
Main Chassis
Main Chassis
098-00028-000 Revision F – May, 2012
for the minimum firmware revisions required for TP 5000 hardware.
Upgrading the Firmware
P/N HW Rev.
090-50331-01 Rev L or higher
Rev K or lower
090-50331-02
090-50331-04
090-50331-05
090-50332-01
090-50311-01
090-50312-01
090-50314-01
090-50315-01
090-50321-01 Rev L or higher
Rev K or lower
090-50322-01 Rev M or higher
Rev L or lower
990-50301-01
990-50301-02
Chapter 6 Maintenance and Troubleshooting
TimeProvider 5000 Part Numbers
, on page 389)..
Minimum
FW Rev.
1.2.3 This module can't
distinguish between
090-50301-01 and
090-50301-02 chassis.
1.0.6 This module can't
distinguish between
090-50301-01 and
090-50301-02 chassis.
2.0.4*
2.0.4*
2.0.4*
2.0.4* This module can't
distinguish between
090-50301-01 and
090-50301-02 chassis.
1.0.6**
1.0.6**
1.2.3**
2.0.4*, ** Should be used w/
090-50301-02 chassis
1.2.3
1.0.6
1.2.3
1.0.6
1.0.6
2.0.4* Chassis can be used by
older firmware, but p/n
can't be identified by
"show inventory"
TimeProvider 5000 User's Guide 399
Notes