Imc Module Leds - Symmetricom TimeProvider 5000 User Manual

IMC Module LEDs

The IMC module provides connectors for 10/100 Ethernet management, EIA-232
serial management, and the GPS/GNSS Timing Antenna. The IMC's LEDs indicate
the following:
Power Module Status

Battery A & B Status

System Health Status

Alarm Status

GPS/GNSS Signal Status

IOC Module LEDs
The IOC module also has two PTP Grand Master 100/1000 Ethernet SFP ports with
LEDs that indicate link and link speed. The IOC module has LED status indicators
and test outputs for the system. The LEDs indicate:
Power Status

Active Status

Ethernet Status

Alarm Status

Holdover Status

Expansion Shelf LEDs
The TP E10 expansion shelf has sixteen (16) 100/1000 Ethernet SFP ports with
LEDs that indicate link and link speed.The TP E30 has twelve (12) 1PPS ports with
LEDs that indicate port enable state. The TP E10 and TP E30 also each have LED
status indicators. The LEDs indicate:
Power Status

Active Status

Ethernet Status

Alarm Status

Holdover Status

098-00028-000 Revision F – May, 2012
Chapter 1 Overview
Functional Description
TimeProvider 5000 User's Guide 51