Tp 5000 Software Options - Symmetricom TimeProvider 5000 User Manual

CLI and SNMP Management

Unicast, multicast, and multicast-hybrid PTP profile support

Unicast and multicast management addressing mode support

Software Options
The TimeProvider 5000 also provides several software options. An activation key is
required to access these options.
Table 1-1. TP 5000 Software Options
FW
Version
SNMP

1.0
SNMP

PTP Multicast & 2-step clock

1.2
SNMP

NTP w/20,000 TPS Capacity for PTP IMC

R1.2 PTP Multicast & 2-step clock

R2.0 500 VLAN (16 base + extended 484)

2.0
PTP Probe

NTP w/120,000 TPS capacity for NTP IMC

TPE10 PTP/SyncE 16 ports license

(Adds availability of Ports 9-16 to standard 8 ports)
There is no expiration date for option keys, with the exception of a demo license that
was offered for the v1.2 release.
Keys are associated with the serial number of the device on which the keys are
stored and travel with that device. This is the IMC card for all software options,
except for the 16-port option for a TP E10 Ethernet expansion shelf. When an IMC
is replaced, keys in the old IMC do not transfer to the replacement IMC. The new
IMC will need its own keys for the desired software options releases. The 16-port
group key for a TP E10 Ethernet expansion shelf, which is based on the serial
number of the expansion shelf, will stay with the expansion shelf on which it is
installed.
The user must manually enter key(s) with CLI commands to gain access to the
licensed software options.
098-00028-000 Revision F – May, 2012
Table 1-1
Available
Software Options
lists all options for the TP 5000.
Keys for options in v1.0
are 6 characters
40-character activation
key for PTP option
6 character activation key
for SNMP option
40-character activation
key for all options in the
v2.0 release
6-character activation key
supported for SNMP
option from v1.0 or v1.2
TimeProvider 5000 User's Guide
Chapter 1 Overview
Overview
Notes
31