Symmetricom TimeProvider 5000 User Manual page 139

set gps mask <mask-value>
To set the GPS cable-delay value

set gps cable-delay <delay-value>
To set the forced PQL state for the GPS port

set gps pql-state {enable | disable}
To set the forced PQL value for the GPS port

set gps pql-value <pql-value>
Range: Height:
Mask: 5 to 45 degrees
Cable Delay: 0 to 999999 nanoseconds
Priority: 1 to 16, where 1 is highest priority and 16 is lowest
PQL-Value: 1 to 3
Default: Mask: 10 degrees
Cable Delay: 0 nanoseconds
Example 1:
To set GPS to auto mode 
tp5000>set GPS mode auto
Example 2:
To manually set the GPS to manual mode, with a system position of latitude of
N37:22:45.123, longitude of W121:55:36.123, and a height 17.5 meters
tp5000>set GPS mode manual latitude N37:22:45.123 longitude
W121:55:36.123 height 17.5
Example 3:
To enable GPS 

tp5000>set gps state enable
Example 4:
To set GPS priority to a value of 2 

tp5000>set gps priority 2
Example 3:
098-00028-000 Revision F – May, 2012
-999.9 to 40000.0 meters
Chapter 3
TimeProvider 5000 CLI Command Set
TimeProvider 5000 User's Guide 139