Antenna Installation Completeness Checklist - Symmetricom TimeProvider 5000 User Manual

Appendix C Installing the GPS Antenna
Antenna Installation
2. Secure the free end of the antenna cable to the appropriate antenna connector
on the rear panel of the TimeProvider 5000 using the right angle adapter
provided with the antenna cable.
Recommendation: Symmetricom recommends coiling excess cable
to avoid gain mismatch between the GPS antenna and the
TimeProvider 5000
the factory-installed crimped connector.

Antenna Installation Completeness Checklist

To verify that antenna installation is complete:
Verify that all power and ground wires are installed correctly and securely

fastened.
Verify that all input and output cables are properly installed.

Verify that all antenna connectors are secure, tight, and weatherproofed.

480 TimeProvider 5000 User's Guide
. Coiling the excess cable also allows you to use
098-00028-000 Revision F – May, 2012