Provisioning The Probe - Symmetricom TimeProvider 5000 User Manual

Appendix F PTP Probe Option

Provisioning the Probe

See Chapter 2 of the TP 5000 User's Guide for Installation details. See Chapter 4 of
the TP 5000 User's Guide for details about provisioning the TP 5000 using CLI
commands.
Note:
5000 is:
Note: The unit's default user name is "admin" and the default
password is "
Enable the Probe Option on the TP 5000
The probe option must be enabled with the Symmetricom authentication key in
order to use the TP 5000 as a probe.
Use the show license
for the TP 5000. Use the
Example:
To enable the probe option with an authentication key of
"ABCDEFGHIJ1234567890KLMNOPQRST0987654321":
tp5000> set license add
The TP 5000 will prompt for the license key:
License key: ABCDEFGHIJ1234567890KLMNOPQRST0987654321
510 TimeProvider 5000 User's Guide
The default IP address for the IMC MGMT port of the TP
IP Address:
Gateway:
Netmask:
symmadmin**
".
command to check if the probe option has been enabled yet
set license command to enter the authentication key for
192.168.0.100
0.0.0.0
255.255.255.0
098-00028-000 Revision F – May, 2012
,