Table of Contents
Advertisement
Chapter 2 Installing
Rack Mounting the Chassis
Figure 2-7.
Rack Mounting the TimeProvider 5000
Rack Mounting the TP E10 & TP E30 Expansion Shelves
Use the following steps to mount the TP E10 or TP E30 expansion shelf in a rack.
Note: The
mounting brackets. 23-inch (58.42 cm) rack mounting adapters are
also available as a separately ordered item. 21-inch (ETSI) rack
mounting adapters are available as a separately ordered item.
1. The TP E10 and TP E30 are shipped with rack mounting brackets attached. The
rack mounting brackets can be removed and reattached in a different orientation,
if desired. See
Figure 2-10
on both sides are attached to the chassis at equal distances from the
brackets
front of the unit (see
using 6-32 x 1/4-inch screws.
2. Mount the chassis to the front of the equipment rack rails with four screws and
associated hardware. Use the proper screws for the equipment rack.
64
TimeProvider 5000 User's Guide
TP E10 and TP E30
Figure 2-8
for mounting hole placements. See
and
Figure 2-11
for chassis dimensions. Ensure that the
Figure 2-12
for the TP E10,
come equipped with 19-inch rack
Figure 2-13
098-00028-000 Revision F – May, 2012
Figure
2-9,
mounting
for the TP E30)
Advertisement
Chapters
Table of Contents
Troubleshooting
