Table of Contents
Advertisement
Chapter 3
TimeProvider 5000 CLI Command Set
Current reference input
Clock status
Phase Offset
Packet service eth1
Packet service eth2
Active alarms
Exp connections
Example 2:
To display the status of PTP/SyncE expansion shelf 8 (id=exp7)
tp5000> show status exp7
Response 2:
Expansion shelf: PTP-SyncE
Shelf time: 2010-03-08 20:33:30
Shelf uptime: 7 days 2 hrs 18 mins
Main Clock status: normal track
Shelf clock status: normal track
Combined Clock status: normal track
Phase Offset: 0 ns
Packet Service: ptp grandmaster
SyncE output PQL: 2
Note: the value of "SyncE output PQL" is the PQL level defined in
PQL-SSM table. See response of command "SHOW PQL-SSM" for
the descriptions of the PQL level.
Example 3:
To display the status of E1/1PPS+TOD expansion shelf 3 (id=exp2)
tp5000> show status exp2
Response 3:
Expansion shelf: E1-TOD
shelf time : 2010-03-08 20:33:30
shelf uptime : 7 days 2 hrs 18 mins
Main Clock status : normal track
Shelf clock status: normal track
Combined Clock status: normal track
Phase Offset : 0 ns
E1 output PQL: 2
Note: The value of "E1 output PQL" is the PQL level defined in
PQL-SSM table. See response of command "SHOW PQL-SSM" for
the descriptions of the PQL level.
246 TimeProvider 5000 User's Guide
:
GPS
:
normal track
:
0 ns
:
ptp grandmaster
:
ptp grandmaster
:
1
:
1, 3, 6, 9
098-00028-000 Revision F – May, 2012
Advertisement
Chapters
Table of Contents
Troubleshooting
