Symmetricom TimeProvider 5000 User Manual page 381

Table 6-4. LED Conditions for the IMC (Continued)
Indicator Label
System Health SYS
Aggregation of
system alarms
indicator
IMC Alarm ALM
IMC module
alarm/fault
indicator
098-00028-000 Revision F – May, 2012
Description
Off - IMC, IOC operating normally
Amber - IMC, IOC operational
Minor Alarm(s)
Red - IMC, IOC operational Major
or Critical Alarm(s)
Off - IMC operating normally
Flashing Green - Software
starting up
Amber - IMC operational Minor
Alarm(s)
Red - IMC operational
Major/Critical Alarm(s)
Chapter 6 Maintenance and Troubleshooting
Troubleshooting
Corrective Action
n/a
Use "show alarm" command to
view alarm IDs and descriptions.
Table A-1 Appendix A,
See in
System Messages
for corrective
actions.
Use "show alarm" command to
view alarm IDs and descriptions.
Table A-1 Appendix A,
See in
System Messages
for corrective
actions. After taking corrective
actions, use "reboot" command to
reboot the card that had the major
or critical alarm..
n/a
Wait for IMC to finish booting.
Use "show alarm" command to
view alarm IDs and descriptions.
Table A-1 Appendix A,
See in
System Messages
for corrective
actions.
Use "show alarm" command to
view alarm IDs and descriptions.
Table A-1 Appendix A,
See in
System Messages
for corrective
actions. After taking corrective
actions, use "reboot imc"
command.
TimeProvider 5000 User's Guide 381