Retrieving Current Alarm Settings; Retrieving Current Alarms; Displaying System Status; Timecreator 1000 Alarm Codes - Symmetricom TimeCreator 1000 User Manual

Chapter 5 Provisioning
Provisioning Alarms
Table 5-7. TimeCreator 1000 Alarm Codes
Alarm Code
DCMUNLOCK
PLLUNLOCK

Retrieving Current Alarm Settings

The "show alarm threshold" command displays the set and clear alarm thresholds of
all ports.
Example
To display set and clear thresholds for all ports, enter the following:
1. Login at the User, Admin or Power-User level (see Login, on page 74).
2. Type
show alarm-threshold

Retrieving Current Alarms

The "show alarms" command displays all current alarms. The "show alarm-state"
command displays the state of all alarms.
Example
To display a list of all current alarms and list of the state of all alarms, enter the
following:
1. Login at the User, Admin or Power-User level (see Login, on page 74).
2. Type
show alarms
3. Type
show alarm-state

Displaying System Status

The "show status" command displays the system status information as follows:
Summary for each DTI client port

Summary for each DTI server port

Active IOC module

Standby IOC module

108 TimeCreator 1000 User's Guide
Description
IOC DCM unlocked
IOC PLL unlocked
and press Enter.
and press Enter.
and press Enter.
097-93100-01 Revision C – February, 2010